Quick Answer
For open-tail cosmetic tubes, specify the delivered state and protective packing before ordering. Review how the tail openings are protected, how tubes are removed and staged, and how their identity reaches the filler. Record deformation or visible foreign matter before corrective handling. Protection during shipment is a separate decision from whether the chosen line can fill and close the actual tube.

A finished display sample with a closed tail can help approve appearance while the production order requires an open-tail tube. The supply and unpacking record must make that difference explicit. This article follows empty tubes from the supplier’s packing arrangement into controlled staging at the filler; it does not prescribe a sealing recipe or a sterilisation process.
Define the actual delivered state
Identify the tube reference, construction, body dimensions, cap and dispensing opening as supplied. State which end is open and which features are already fitted. Do not use the sample photograph as the only instruction. A different tail state changes the available filling route and needs the filler’s review.
Use the cosmetic tube application discussion for the format shortlist, then return to the exact supplied configuration. Material names and nominal volume do not establish opening protection, machine fit or the condition delivered in a carton.
Specify protection around openings
Ask the supplier to describe the proposed bag, tray, divider or other protective arrangement. Identify what contacts the tube body and how open ends remain protected in the intended shipment. Confirm any temporary protection, its removal stage and the responsible party. Do not invent a protective feature that is not part of the offer.
Keep packaging protection distinct from a sterile claim. A closed bag or covered carton is not evidence of sterility. Any special cleanliness requirement and related process must be specified and supported by the responsible teams. This guide recommends traceable handling, not an unqualified alcohol soak or universal cleaning procedure.
Review orientation and shape in the carton
Record how tubes are arranged and supported. Inspect whether open tails, shoulders or caps contact neighbouring items or packing surfaces. The receiving team should know how the supplier expects the tubes to be removed without unnecessary squeezing or dragging. A count of pieces per box does not describe these contacts.
Compare the proposed dimensions and shape against the filler requirements. If a tube is visibly flattened or distorted at receipt, record its initial state before reshaping it. The filler and supplier should assess whether the relevant equipment can accept the actual condition. Do not set a universal ovality limit from a broad material guide.
| Handoff field | Supplier information | Receiving observation |
|---|---|---|
| Tube identity | Part, construction and drawing revision | Matches received labels |
| Supplied state | Open tail and fitted features | Actual openings and components |
| Protection | Agreed packing materials and arrangement | Intact, disturbed or incomplete protection |
| Shape | Relevant geometry and accepted specification | Visible distortion before handling |
| Unpacking | Proposed removal and staging scope | Observed contact and identification |
Inspect before changing the received condition
Capture carton damage, disturbed protection and visible conditions while their location remains identifiable. Record which cartons were opened and where affected examples came from. Distinguish a confirmed finding from an estimate across unexamined stock. Do not erase the original evidence by cleaning or sorting all the parts first.
Keep suspect stock clearly separated under the receiving site’s procedure. The responsible quality team determines containment and disposition. A supplier may need representative affected samples and appropriate references for review; preserve their relationship to the shipment instead of sending an unlabeled handful.
Plan unpacking with the filler
Ask the filler to describe where cartons are opened, how tubes are transferred and how their references remain visible during staging. Avoid a gap in which supplier labels are removed but internal identification has not yet been applied. A bag of similar-looking tubes should not lose its drawing or lot identity on the way to the line.
Review the actual removal action, especially where decorated surfaces or open tails may be contacted. If temporary protection is removed, record when and by whom. The site’s applicable hygiene and safe-handling procedure controls the action; the packaging article should not substitute an invented method.
Keep staging history visible
Record any relevant interval between unpacking and filling, the protected state and unplanned handling that affects the review. Do not assume that an earlier receiving acceptance covers every subsequent storage or transfer condition. Reclose or protect unused stock according to the agreed site procedure and retain identification for partial quantities.
Where another shift uses the remaining stock, provide the actual configuration and control status. A container labelled tube stock without the source reference leaves an avoidable question. Wholesalers who repack tubes should preserve the same identity and explicitly describe their supplied state to the customer’s filler.
Connect observations to the line trial
A representative trial should use identified tubes in the agreed delivered state and the filler’s selected configuration. Record which parts are setup samples and which represent the proposed commercial supply. The trial should address the actual filling and closing questions with the responsible parties, not adopt fixed sealing thresholds copied from another tube.
For a hypothetical example, a display sample might be closed while the offered production tube is open-tail. Resolve that difference before scheduling the line review. This is an illustrative handoff issue, not an Oulete case. Keep the intended supplied state attached to the sample approval record.
Prepare the tube supply brief
Start with the intended hand cream tube or other confirmed candidate, then list the required delivered state, filler details and proposed packing. Use the packaging enquiry page to request the actual supply scope. Oulete’s confirmed cosmetic tube MOQ is 10,000 pieces. Construction, decoration, protective packing and trial samples still need an itemised proposal.
Frequently Asked Questions
Does a sealed display sample define production supply?
No. State the delivered tail condition and fitted components separately.
Does protective bagging prove sterility?
No. Protection and any special cleanliness claim require distinct specifications and evidence.
Can tubes be reshaped before reporting incoming damage?
Preserve their as-received condition first, then document any authorised handling and its outcome.



