TY030-30ML
- Body height
- 55.9 mm
- Body diameter
- 35 mm
- Listed brim-full capacity
- 33 ml
Custom Dropper Bottles Manufacturer
Dropper bottle packaging for cosmetic companies, contract fillers and wholesalers. Define the bottle, pipette, bulb, closure and seal as one assembly for your serum or facial-oil project.
Glass packaging: MOQ 10,000 pieces. Other material and component minimums are confirmed for the selected project.
Choosing a Cosmetic Dropper Bottle
Quick Answer: A cosmetic dropper bottle combines a bottle with a matched pipette, bulb, closure and seal. Choose it against the intended formula, fill volume and filling process, then test pickup, release, fit and leakage on a complete filled sample. Glass packaging starts at 10,000 pieces; confirm other formats separately.
A dropper is not automatically a calibrated dosing device, a sterile pack or a child-resistant closure. Any such requirement needs its own specification and evidence.
Compare Dropper Bottle Options
The illustrations below show category and appearance options, not confirmed specifications for every format. Request availability, the current bottle drawing and the matched dropper assembly before placing an order.
Review the exact glass type, neck and complete dropper assembly for your cosmetic serum or oil. Glass packaging starts at 10,000 pieces.
Confirm the resin, body geometry, neck and matched dispensing assembly for the proposed model. Availability and MOQ require project confirmation.
Treat bamboo as a decorative component unless the complete material specification confirms otherwise. Verify the underlying bottle and formula-contact parts.
Confirm whether aluminum is the bottle body or an outer decorative component. Any internal coating and formula-contact construction need model-specific review.
Frosted appearance can support a matte design. It is not evidence of UV protection; confirm barrier requirements separately.
Review flat-panel artwork and the matched dropper assembly. Compare the square bottle page and request the chosen model drawing.
6 Products Found.
Requirements by Buying Team
Cosmetic Companies
Cosmetic companies: define the serum or facial-oil formula, desired dispensing experience and appearance. Validate the finished formula with all contact parts.
Contract Fillers
Contract fillers: confirm usable fill, headspace with the pipette inserted, capping settings, assembly sequence and line handling on the selected drawing.
Wholesalers
Wholesalers: confirm model identification, bottle/dropper set quantities, protection in cartons and repeat-order specifications.
Product and Quality Teams
Product and quality teams: agree closure fit, pickup/release, leakage, storage and transport checks. Request project-specific material documentation.
Customization and Component Sourcing
Begin with an existing bottle and matched dropper where possible. Compare the full component specification rather than choosing by a cap color or neck diameter alone.
- Existing model with decoration: confirm the body, dropper assembly, color and artwork before quoting.
- New bottle or cap geometry: request feasibility, drawings, tooling scope and approval stages in writing.
- Identify who supplies the body and each dropper component, and who is responsible for complete-assembly approval.
- Confirm whether a bamboo or metallic appearance is an outer decoration or a different body/contact material. Do not infer recyclability from appearance.
Bottle and Dropper Fit
- Review the bottle drawing, exact material, usable fill volume and neck/seal interface for the proposed model.
- Check pipette length and bottom clearance with the intended fill; do not assume identical capacity labels mean identical internal dimensions.
- Confirm bulb, seal and pipette contact materials and test with the actual serum or oil.
- Frosting is an appearance finish, not proof of light protection. Ask for evidence when the formula requires a defined light barrier.
Review 30ml glass dropper bottles or square dropper bottles as starting formats; final availability and specifications require model confirmation.
Complete Sample Approval
- Agree sample scope: bottle, pipette, bulb, closure, seal and the intended decoration.
- Test pickup, release, closure application, leakage and component changes using the actual contents.
- Agree storage and transport conditions with the product team; visual inspection alone does not establish long-term compatibility.
- Keep an approved drawing, component list, artwork and signed sample as the bulk-production reference.
Use the cosmetic packaging sample approval checklist to document sign-off.
MOQ, Samples and Project Timing
Glass packaging starts at 10,000 pieces. Confirm minimums by model, finish and component set in the quotation. Plastic, aluminum and standalone dropper-component minimums require separate confirmation; the plastic lotion-bottle MOQ does not automatically apply.
Ask about evaluation samples before committing to production. Sample availability, cost and quantity are separate from bulk MOQ. A request for ten testing pieces is not an offer of ten-piece custom-mold production.
Confirm tooling, decoration, sample revisions and production timing after the specification review. Delivery dates, shipping terms and costs should be agreed in the project quotation.
Keep Procurement and Filling Approval Aligned
Prepare one specification that the buyer, filler and packaging suppliers can all approve. Record the proposed model, component sources, formula-contact materials, drawing revision and decoration standard.
For each order, request applicable material or test documentation and an agreed inspection plan. Certificates, capacity figures and supply-chain claims should be checked against current evidence rather than assumed for every dropper format.
Define Your Dropper Bottle Brief
Frosted Glass Presentation
Specify the intended fill and request a current drawing. Glass packaging MOQ: 10,000 pieces. A frosted appearance does not establish light protection.
Plastic Bottle Assembly Review
Confirm the exact resin, neck, matched dropper and complete filled-sample performance. Minimum order quantity is confirmed for the proposed model.
Glass Bottle and Pipette Fit
Review bottle dimensions, pipette clearance and the full closure assembly. Glass packaging MOQ: 10,000 pieces.
Square Glass Presentation
Review flat-panel artwork, neck fit and component alignment. Glass packaging MOQ: 10,000 pieces; confirm the selected model and fill volume.
- Specification Checklist
- Bottle: selected-model drawing, exact material, usable fill and neck/sealing geometry.
- Dropper: pipette dimensions, bulb/closure/seal materials, fit and dispensing requirements.
- Decoration: artwork, color reference, process and decorated-sample approval.
- MOQ: glass packaging 10,000 pieces; other bodies and standalone components confirmed separately.
- Timing: sample stages, approval milestones, tooling if required and production dates in the quotation.
- Packing: protective separation, bottle/dropper delivery arrangement, carton specifications and agreed shipping terms.
Compare 30ml Plastic Dropper Body References
Compare these 30ml plastic bottle-body references before selecting a matched dropper. These are not glass models or complete dropper specifications, and are not assigned to the photographs above.
TY031-30ML
- Body height
- 75 mm
- Body diameter
- 30.5 mm
- Listed brim-full capacity
- 33 ml
TY035-30ML
- Body height
- 62.5 mm
- Body diameter
- 35 mm
- Listed brim-full capacity
- 35 ml
Glass packaging starts at 10,000 pieces. Request separate MOQ confirmation for these plastic dropper bodies and the selected dropper assembly. Brim-full capacity is not the usable fill; confirm the neck finish, pipette length and closure fit on a drawing and sample.
Before ordering: request the current revision-controlled drawing and a complete sample. Catalogue dimensions are selection references; tolerances, materials, decoration area and supply scope must be confirmed in the approved specification.
Build Your Dropper Bottle Specification
Use a photographed style to begin the discussion, then identify the bottle, pipette, bulb and closure as one matched pack. If you are replacing an existing assembly, send its model or drawing and explain what must change; a similar neck diameter alone does not establish fit.
Choose a Starting Format
Compare 30ml glass dropper bottles and square dropper bottles, or send a reference bottle. Confirm whether the quotation covers the body, dropper or complete assembly. For a new shape or component, agree feasibility and tooling scope before development.
Include These Details in Your Brief
- Application, intended fill volume, target market and reference image or model.
- Body and dropper material preferences, cap style, finish, artwork, total quantity and split by color or design.
- Filling method, non-confidential handling requirements, packing arrangement, required date and the person responsible for assembly approval.
Evidence to Request for Special Requirements
For light-sensitive products, frosting or a dark appearance alone does not establish a specified light barrier. For calibrated dispensing, a pipette graduation alone does not establish dose accuracy. Define the requirement and agree evidence and formula trials for the selected pack.
Keep the drawing, artwork, component list and sample approval record aligned. Send your dropper bottle brief, or compare lotion pump assemblies and airless packaging if you need a different dispensing route.